OUTBACKER antenna are made by Terry Clinch in Perth Western Australia, and have been performance proven in rugged Aussie bush country, for over 40 Years. People in this area of the world rely heavily on HF communications for keeping in touch with emergency, commercial and government services, and Terlin antenna are used on a high percentage of these essential service vehicles. Our top quality antenna, are now available worldwide, bearing the name OUTBACKER.
The world renowned, OUTBACKER antenna evolved from the standard Terlin commercial antenna, modified to amateur requirements. All Outbacker, vehicle mounted antenna are manufactured in-house in Perth Western Australia. All antenna are constructed on a fibreglass main shaft with helical copper windings covered with a coating of the latest composite for added strength, durability and protection.
For ease of operation tap points, frequencies or bands, are clearly and permanently engraved into the antenna, . The wander lead is used for quick, easy, manual channel changing just plug one end into the lowest socket , wind lead around the antenna and plug the other end into the required frequency. Every antenna sold is permanently engraved with its own serial number for easy identification, or replacement. Easy to read Bands are engraved into each antenna as standard, with the callsign optional.
The OUTBACKER family of antenna comes in three series, the Classic, Covert and the Outreach.
-Typical bandwidth at resonance-
80m 15 Khz - 40m 25 Khz - 30m 50 khz - 20m 200 Khz - 17m 220 Kz -
15m 250 Khz 12m 250 Khz - 10m 600 Khzhz
Order Code:- 011-002 “OB8” $250.00
- The original OB8 Classic. The go-anywhere anywhere unquestioned, all season, all climate, all terrain, HF mobile champion. The OB8 antenna is 1800mm long assembled, split 2 piece version. The bottom mainshaft is 80cm with an 80cm 2 section stinger.
- Bands covered are:- 80m-40m-30m-20m-17m-15m-12m-10 meter bands.
- The bands on this antenna are manufactured with an International bandplan profile.
- No antenna tuning unit or base matching device is needed.
- When combined with Outbackers, (OSBHD) heavy duty spring base, the Classic makes a very rugged and professional installation, that will last for years.
- Easy to read Bands are engraved into each antenna as standard, with the callsign optional.
- Maximum power:- 500 Watts,PEP
Order Code:- 010-010 “ATTACH’E’’ $270.00
- Last but not least is the Attach’e. This new generation backpack special has two main shaft sections and one adjustable stinger section, each section is the standard military backpack length of 38mm /17’’ long, manufactured for quick deployment and easy breakdown, yet strong enough to be used as a vehicle mobile.
- Bands included are 80m-40m-30m-20m-17m-15m-12m-10m- metre bands. .
- Three sections in total. . Total length 1200mm / 48”.
- Easy to read Bands are engraved into each antenna as standard, with the callsign optional.
- The bands on this antenna are manufactured with an International bandplan profile.
- Maximum power:- 100 Watts, PEP
Order Code:- 012-001-OR “OUTREACH” $345.00
- All Outreach models have 80m-40m-30m-20m-17m-15m-12m-10m- 6metre bands.
- Bull-bar mountable. Only 3.6m tall. Exceptional performance!
- All bands are centre loaded for peak performance. Compared to any other whip you have used - you’ll be amazed.
- Split 8’ shaft (2 x 1.2m sections) and 1.2 meter stinger.
- The outreach antenna breaks down and packs into a 1.2metre PVC tube for easy portability and storage.
- Providing sufficient ground system or counterpoise is used the Outreach can also be used as a portable antenna system .
- All Outreach antenna, are attached to their mounts via the standard 3/8"x24tpi UNF thread, are black in colour and tuned to give a VSWR of < : 2.0:1.
- A rough-tough, HF antenna.
- We recommend the OSBXHDSS spring mount with the OUTREACH series as it come with a stronger 8mm Stainless Steel parallel spring coil. As the OUTREACH is the longest of all the Outbacker antenna the stronger 8mm spring coil, will hold the antenna more vertical when used mobile.
- Bull-bar or a stromg fabricated mounting bracket for the OUTREACH series antenna is highly recommended.
- By far the best performer of all the Outbacker Mobile Series.
- Easy to read Bands are engraved into each antenna as standard, with the callsign optional.
- The bands on this antenna are manufactured with an International bandplan profile.
- Maximum power:- 600 Watts PEP
- A PVC packing / storage tube is supplied with all antenna.
Order Code:- 112-004-ERZ “EZR245” $270.00
- All ERZ models have 80m-40m-20m-15m-10metre bands.
- Bull-bar mountable. 2.4m tall. Exceptional performance!
- All bands are centre loaded for peak performance. Compared to any other whip you have used - you’ll be amazed.
- Split 160cm main shaft (2 x 80cm sections) and an 80cm stinger.
- The ERZ antenna breaks down and packs into a 90cm PVC tube for easy portability and storage.
- Providing sufficient ground system or counterpoise is used, the ERZ can also be used as a portable antenna system .
- All ERZ antenna, are attached to their mounts via the standard 3/8"x24tpi UNF thread, are black in colour(optional colours availabe) and tuned to give a VSWR of < : 2.0:1.
- A rough-tough, HF antenna.
- We recommend the OSMXHDSS spring mount with the OUTREACH series as it come with a stronger 8mm Stainless Steel parallel spring coil. As the OUTREACH is the longest of all the Outbacker antenna the stronger 8mm spring coil, will hold the antenna more vertical when used mobile.
- Bull-bar or a stromg fabricated mounting bracket for the OUTREACH series antenna is highly recommended.
- Easy to read Bands are engraved into each antenna as standard, with the callsign and colour optional.
- The bands on this antenna are manufactured with an International bandplan profile.
- Maximum power:- 600 Watts PEP.
- With PVC carry case
Manufactures and Worldwide distributors of HF Mobile Antenna
“Home of the Outbacker”
“We Build to Radiate and Communicate”
- ALL ITEMS SOLD TO BUYERS , ARE DISPATCHED BY
- AUSTRALIA POST and or INTERPARCEL
- Payment by EFT - Money order
- ALL INTERNATIONAL BUYERS PLEASE EMAIL ME AND I WILL SEND AN INVOICE WITH OPTIONS FOR PAYMENT.
Email terry@outbacker.biz to place your order.